From geometry to repeatable production.
Make the part, material and production targets the starting point for your tooling approach.
Discuss Your Project
Our approach
F(kN) = [part area × cavities + runner area](cm²) × mean cavity pressure(MPa) × 0.1 × factor. This is preliminary sizing; pressure distribution and actual tool/machine limits require separate review.
01
Starting information
- Part geometry and surface requirements
- Material information and target volume
- Tooling concept and existing constraints
02
Working outputs
- Tooling review topics
- Critical risks and unresolved questions
- Design–mold–process coordination notes
Related solutions
Design
Evaluate geometry alongside operating conditions, material behavior and manufacturability.
02Materials
Compare polymer families and grades using real operating conditions and verifiable technical data.
03Mold
Make the part, material and production targets the starting point for your tooling approach.
04Machine
Evaluate a machine with the requirements of the part, mold and process, rather than its model name alone.
05Simulation
Define the purpose, input quality and validation needs of a simulation alongside the product decisions.
06Process
Link manufacturing conditions, observations and quality results to the same product and revision.
Let’s think through
your next product.
Share your requirements. Explore materials and the manufacturing route together.
Discuss Your ProjectJITMELT IQ
Engineering Center
Record cavities, runner, cavity pressure and tooling concepts. Use the Design projected area for preliminary clamping estimates.