Think about your product and production together.
Evaluate geometry alongside operating conditions, material behavior and manufacturability.
Discuss Your Project
Our approach
Mass = volume × solid density. Flow/wall ratio is not a suitability approval; no CAD/DFM solver is executed.
01
Starting information
- Part drawing or available geometry
- Operating conditions and technical requirements
- Critical dimensions and intended process
02
Working outputs
- Review topics and open questions
- Material–geometry assessment notes
- Prioritized engineering actions
Related solutions
Design
Evaluate geometry alongside operating conditions, material behavior and manufacturability.
02Materials
Compare polymer families and grades using real operating conditions and verifiable technical data.
03Mold
Make the part, material and production targets the starting point for your tooling approach.
04Machine
Evaluate a machine with the requirements of the part, mold and process, rather than its model name alone.
05Simulation
Define the purpose, input quality and validation needs of a simulation alongside the product decisions.
06Process
Link manufacturing conditions, observations and quality results to the same product and revision.
Let’s think through
your next product.
Share your requirements. Explore materials and the manufacturing route together.
Discuss Your ProjectJITMELT IQ
Engineering Center
Save product requirements and a geometry summary. Part mass uses the Materials density; the flow/wall ratio summarizes the geometry.